Several reasons for using LED panel lights in office buildings:
For every 1 kWh of electricity used, the carbon dioxide emissions are approximately 0.62 kilograms. If LED panel lights are used in comparison, it can reduce carbon dioxide emissions by 0.62 kg x 68%=0.42 kg, which plays a significant role in protecting the ecological environment.
Environmentally friendly LED lights do not contain mercury (Hg) or lead (Pb) and are recyclable.
The service life of long-life ordinary fluorescent lamps is relatively short, about 3000-5000 hours. The service life of LED panel lights is over 30000 hours (3-5 years), which is equivalent to 10 times the service life of ordinary lights.
The response time of the delay free LED light is in the nanosecond range, and there is no need to wait to turn on the light. It lights up instantly and can be repeatedly turned on and off countless times. However, there is a delay process when ordinary fluorescent lamps are turned on, and frequent switching can also cause damage to the lamps.
Non flicker ordinary fluorescent lamps use alternating current, so they produce 100-200 flashes per second. LED lights convert AC power directly into DC power without producing flicker, protecting the eyes and providing a "soft" lighting environment.
The material is sturdy. Ordinary fluorescent lamps use glass material, which is fragile and dangerous. LED lights are made of advanced engineering plastics and aluminum alloy, with built-in semiconductor chips that emit light. They have no filaments, no glass bubbles, are not afraid of vibration, and are not easily broken.
Reduce labor costs and minimize losses. Within 3-5 years, many ordinary fluorescent lamps need to frequently break down, and at the same time, electricians need to replace them with new ones, which not only wastes manpower but also increases losses. Even small numbers can accumulate significant costs. For LED lights, the service life is 3 years, which means that during these 3 years, the lamp will not be damaged. Even if there are problems, the manufacturer can be consulted to solve them. This not only saves labor costs but also does not increase losses, reducing the burden on the enterprise.
